TRICONEX TRICON 3703E Analog Input Module

TRICONEX TRICON 3703E Analog Input Module Differential Isolated 0-50-10VDC TMR 16 points

International Approvals
The Tricon controller has been certified as complying with multiple internationally recognized standards by the following internationally recognized
certification agencies, these certifications have qualified the Tricon for use around the world in safety critical applications. Test reports from the various
certification agencies are available upon request.
TÜV Rheinland — TÜV has certified that the Tricon v9 and v10 controllers are in full compliance with the internationally recognized standards
listed below, and thus are qualified for use in the following applications and jurisdictions.
• Emergency safety shut-down or other critical control applications requiring SIL 1-3 certification per the functional safety requirements of
IEC 61508 9 (only Tricon v9.6 or later)
• Emergency safety shut-down or other critical control applications requiring AK 1-AK6 certification per the functional safety requirements of
DIN V 19250 and DIN V VDE 0801 (only Tricon v9.x)
• Fire and gas detection applications requiring certification per the requirements of EN 54
• Fire and gas detection applications requiring certification per the requirements of NFPA 72 (only Tricon v9.6 or later)
• Burner management applications requiring certification per the requirements of DIN VDE 0116
• Burner management applications requiring certification per the requirements of NFPA 8501 or NFPA 8502 (only Tricon v9.6 or later)
• All applications in the European Union or other jurisdictions requiring compliance with the EMC Directive No. 89/336/EEC and Low Voltage
Equipment Directive No. 72/23/EEC
• All applications in the European Union or other jurisdictions requiring compliance with the ATEX Directive No. 94/9/EC for Zone 2, Group IIB
hazardous locations
• Environmental, health, and safety applications in semiconductor manufacturing facilities per the requirements of SEMI S2
For hazardous location applications, see the Tricon Planning and Installation Guide for application-specific installation instructions.
Canadian Standards Association (CSA) — CSA has certified that the Tricon v10 controller is in full compliance with the internationally recognized electrical safety standards and is qualified for general use in North American and other jurisdictions requiring compliance with these standards.
Factory Mutual Research (FM) — Factory Mutual has certified that the Tricon v10 controller is in full compliance with the international recognized standards and is qualified for use in Class I, Division 2 Temperature T4, Groups A, B, C, and D hazardous indoor (or outdoor in a NEMA 4
cabinet) locations. For hazardous location applications, see the Tricon Planning and Installation Guide for application-specific installation instructions.
European Union CE Mark — Based upon the independent TÜV evaluation and test results, Triconex has certified the Tricon controller is suitable
to use in the European Union and all other jurisdictions requiring compliance with the European Union EMC Directive No. 89/336/EEC and Low
Voltage Equipment Directive No. 72/23/EEC, see Certificate of Compliance for details. For hazardous location applications, see the Tricon Planning
and Installation Guide for application-specific installation instructions.
U.S. Nuclear Regulatory Commission (NRC) — The NRC has certified that the Tricon controller is suitable for use in nuclear 1E
applications within the limitations and guidelines referenced in the NRC Safety Evaluation Report (SER) ML013470433, Review of Triconex
Corporation Topical Reports 7286-545, “Qualification Summary Report” and 7286-546, “Amendment 1 To Qualification Summary Report,”
Revision 1. This report is available from the NRC via the Agency Document Access and Management System (ADAMS) Web site. This
qualification was based upon EPRI TR-107330, Generic Requirements Specification for Qualifying a Commercially Available PLC for SafetyRelated Applications in Nuclear Power Plants. For details on models and revisions qualified for 1E applications, please contact Invensys
Nuclear by calling toll-free 866-703-6300, toll 949-885-0885, or visit the Invensys Nuclear Web site at http://www.invensysnuclear.com.