Vibro-meter 200-595-031-111 VM600 CPUM

In stock

Vibro-meter 200-595-031-111 VM600 CPUM module is the core component of the vibration meter VM600 series condition monitoring system (CMS). It is an intelligent front-end data acquisition unit (DAU),
Use with VM 600 CMS software. The CMC16 module can capture, analyze and transmit the results to the master via the VM 600 series CPU M module with Ethernet controller or directly via the serial link
Airplane.
The input to the CMC16 module is fully programmable and can accept signals representing speed, phase reference, vibration (acceleration, velocity, or displacement), dynamic pressure, air gap rotors, and polar profiles. It can also accept anything
Dynamic signal or any quasi-static signal.
The CMC16 module features:
, collect vibration data
● Analyze vibration data
● Transfer vibration data to the host

Categories: Vibro-meter

Brands:

Product parameters:
Model: V200-595-031-111 VM600
Working voltage: 24VDC
Operating temperature: -20°C~ +70°C
Vibration measurement range: 0~ 50mm/s
Temperature measurement range: -50°C~+150°C
Communication interface: Modbus RTU, Profibus DP, Ethernet/IP
Vibro Metre-200-595-031-111 VM600 control processor is a dedicated modular unit that completes control logic and control algorithms with a microcomputer or microprocessor at its core.
In a computer system, the control processor and the processor are the two basic components. Controllers are commonly used to control various hardware and software resources of a computer, which can be controlled by command and control
Signals to coordinate and manage the various components; The processor is the core component of the computer, carrying out instructions, processing data, controlling individual hardware and performing tasks required by various operating systems
Let’s wait.

200-595-031-111 VM600 Technical specifications
●16 dynamic channels and 4 speed channels
● Up to 20 processing outputs per dynamic channel and per dual channel (12 per xmc 16)
Capture data simultaneously on all channels using asynchronous (fixed frequency) or synchronous (sequential tracking) sampling
● 24-bit data acquisition, high SNR data processing, high-resolution FFT up to 6400 per 500 ms
line Designed to work with VibroSight software
VM600 High quality, reliability status monitoring module Mk2/VM600 rack mounted mechanical monitoring system
The system is optimized for high performance combustion monitoring applications. XMC16 condition monitoring module for combustion
block 16 dynamic channels and 4-tachometer (speed) channels are available, all of which can be configured independently.
The XMC16 processing module is always presented as a set of modules (card pairs) with associated XIO16T input/output modules
Block – upUse.trait
●16 dynamic channels and 4 speed channels
● Up to 20 processing outputs per dynamic channel and per dual channel (12 per xmc 16)
Capture data simultaneously on all channels using asynchronous (fixed frequency) or synchronous (sequential tracking) sampling
● 24-bit data acquisition, high SNR data processing, high-resolution FFT up to 6400 per 500 ms
● Designed to work with VibroSight software