Foxboro FBM233 P0926GX Voltage Monitor

Each FBM233 module has a single 10/100Mbpos copper with large mesh connections and an RJ-45 block front connector for connecting to dual-port with large mesh devices. The FBM233 is connected to a large network switch or hub in order to communicate with one or up to 64 external devices. The modules are grouped together to provide several levels of fieldbus modules (FBM). In this configuration, one FBM233 is the Master, the other is the tracking module, whether the input point on the control station is transferred to the Master’s network with the input received on the device, the device output point depends on the fetch drive) by the Masterfracker module. Role switching If a problem is detected (e.g., loss of heartbeat of any device caused by /0 action: or the user can switch the role to SMDH at any time. The general network configuration shown in Figure 1 is displayed allocator The FDSI configurator sets up the FBM233 port and the XML-based device profile. The port configurator allows you to easily set communication parameters for each port (for example, dynamic host Configuration Protocol IP address). Device configurator is not required for all devices, but when required, it configures device specific and point specific tests (e.g., scan rate, address of data to be transferred, and amount of data to be transferred at a time).