ABB PFTL301E-0.1kN  | Order Number: 3BSE019050R100

Product: Pressductor® Pillow Block type magnetic force sensor (horizontal force measurement type), ABB Millmate tension system standard magnetic force measurement unit, based on the principle of magnetostriction (magnetic induction), specifically for measuring the horizontal component force of the rolls and isolating the interference of the roll's own weight. ABB Group.

I. Model Distinction

PFTL201D: Aviation plug Cannon connector (removable cable), applicable to cold rolling / pickling / annealing / coating production lines;

The suffix DE indicates a fixed cable with protective sheath, mostly used in harsh rolling machine working conditions;

Range: Rated 100kN (100000N), Part Number 3BSE008922R0100, ABB Group.

Core Technical Parameters

1. Force Measurement Performance

Rated Load: 100kN; Measurement Direction: Horizontal lateral force measurement (measuring the tension of the roll only, without the weight of the roll) ABB Group

Accuracy Grade: ±0.5%FS; Linear Error<0.3%FS

Overload Capacity: Rated 10 times (1000% FS) short-term overload without damaging, all-directional impact resistance, high rigidity ABB Group

Principle: ABB patented Pressductor magnetic induction, no elastic deformation, no fatigue loss, over 100 million cycles without calibration ABB Group

2. Electrical Specifications

No built-in power supply: Provided by the matching PFEA111/PFEA112 tension transducer module with 330Hz AC excitation

Output: Low-frequency AC low impedance signal, resistant to frequency converter and large motor electromagnetic interference, stable long-distance wiring

Connection: Cannon multi-core aviation plug, IP67 dustproof and waterproof connector

3. Mechanical & Environmental

Shell: Solid stainless steel forging, corrosion-resistant, resistant to rolling machine emulsification liquid spraying

Protection Grade: IP66/IP67

Operating Temperature: -40℃ to +85℃, suitable for high-temperature annealing furnaces, humid pickling lines

Installation: Pillow-type bearing seat structure, directly installed on the bearing positions of the measuring rolls, replacing the original bearing seat installation

Net Weight: Approximately 33kg

Complementary System

Must be combined with ABB transducer + controller to form a complete tension system:

PFEA111/PFEA112: Signal amplification transducer (specific for the pressure head)

Millmate400 / PFTL controller: 4-20mA/Profibus output for connection to AC800M, DCS closed-loop tension control

Application Industries

Metallurgy (main): Cold rolling / pickling / annealing / coating production lines, tension detection for rolling mills, live loop tension detection;

Papermaking: Tension of high-speed paper machines, rewinding machines;

Film / Cable: BOPET film, copper and aluminum cable extrusion and drawing;

Chemical fiber textile: High-speed spinning, non-woven fabric entire line tension control.