Manufacturer: Bently Nevada
- The ently 130539-07 Speed Monitoring Module, more accurately known as the Bently Nevada 130539-07 Speed Acceleration Monitoring Module, is a high-performance vibration monitoring module. It is used to monitor and analyze the vibration of rotating machinery equipment in real time to improve the reliability and safety of equipment. The following is a detailed introduction to the main features and functions of the module:I. Product overview
Brand & Manufacturer: Launched by Bently Nevada, Inc., a leader in machine protection and condition monitoring.
Model: 130539-07
Application: Widely used in power, oil and gas, chemical, manufacturing, aerospace, transportation and other industries, for monitoring the vibration of key equipment.
Two, the main function
High precision measurement:
The measurement range is wide, and the vibration acceleration measurement of 0-5 g can be achieved.
Provides 0.01 g high resolution measurement to ensure data accuracy.
High speed sampling:
The sampling rate is up to 10 kHz, which can monitor the vibration of the equipment in real time to ensure the real-time and accuracy of the data.
Multi-channel monitoring:
As a 4-channel monitor, it can receive signals from displacement, speed and acceleration sensors at the same time to realize vibration monitoring of multi-equipment or multi-bearings.
Bentley Bently Nevada 130539-07 Features:
Ideally, an axial probe is installed to directly monitor the thrust ring, so the measurement results show the position of the thrust bearing in relation to the thrust bearing clearance. Note Because thrust measurements are made by measuring the gap voltage close to the probe that is used as an input, sensor failures (gaps out of range) can be misinterpreted by the monitor as a shift in thrust position, resulting in false thrust alerts.
As a result, Bentley Nevada LLC. It is not recommended to use a single probe in thrust position applications. Instead, these applications should use two proximity probes to monitor the same ring or shaft, AND the monitor should be configured to AND vote, meaning that both sensors must simultaneously reach or exceed their alarm set points to activate the monitor’s alarm relay. This 2-out-of-2 voting technology (also known as AND voting) provides the best protection against fake and missed access.
Although the 130539-07 monitor can be set to single OR double voting (OR/AND), double voting is strongly recommended for all thrust position applications. Careful probe range and adjustment is essential for mechanical protection in this monitor. Improperly adjusted sensors may prevent the display from sounding an alarm (without mechanical protection).
There are no reviews yet.